How To Repair A Cabinet Microwave Broken Nut

If the microwave is under warranty then go a replacement telling them information technology's a manufacturing defect, if not then you tin can do what you want with it then my course of activeness would be to remove the encompass and see what my options are. The metal covers on microwaves are by and large pretty easy to get off, a few screws and they slide off, getting them back on is the opposite procedure. Working with the cover on is challenging considering you lot don't want metal shavings getting into the electronics or tools to harm information technology while you lot're working.

I like your nut on the underside idea, it's simple and the least work once yous have the cover off, unless you tin infringe a tap and dice set and re-cutting the thread. Y'all could try that with the cover on of form, however small shavings of metal volition get into the microwave from that, which could lead to a curt. Epoxy on the summit is not a great class because information technology'south probably painted, you'd be gluing onto the paint instead of metallic, so you'd want to sand a clean surface if you tried that. Information technology might agree or it might not, and if it were me I'd be constantly worried it was going to drop on me.

At that place are other options, for example a toggle commodities:

If y'all can find i of these that's minor enough to fit through the hole, and if in that location's enough infinite behind the hold you could push button one information technology through and use it to hold information technology up, only be aware you wouldn't be able to get it back out again without taking the embrace off. Personally I'd use that as a concluding option, my commencement would exist to get the cover off, merely be conscientious nearly your own safety around the electronics.

Source: https://diy.stackexchange.com/questions/128646/how-can-i-bolt-a-microwave-to-the-upper-cabinet-if-the-bolt-hole-is-stripped

Posted by: reploglecambee.blogspot.com

Share this post